RFID IP68 waterproof proximity card reader
Model NO:HSY-P120

1. Frequency:125KHz or 13.56MHz

2. Waterproof degree:IP68

3. WG26 standard,WG34/RS232/485 optional


Material: Metal

Working Voltage: DC 9V-16V
Static Current: ≤80mA
Card Type: EM, Mifare,
Communication Distance:100M
Reading Range:3-10cm
Support EM-ID,M1-mifare card,
Ambient Temperature
: -10-50 Degree

Ambient Humidity: 10%
International Standard Wiegand Interface

Size: 120 *56*18mm



Using "+"type screw driver to loosen the screw between the panel and motherboard.

And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

WG26/34 RS485 RS232

Red: DC 9V-16V Red DC 9V-16V Red:  DC 9V-16V

Black: GND BlackGND Black: GND

Green: D0 Green4R+ Green: RX

White: D1 White 4R- White: TX



1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. The wire connects reader to controller, advise use 8 cores stranded twisted pair cable(among them, three strands are spare, if no need reader show illegal card s by sound and light, LED wire can not be used, data wire Data1 Data0 are twisted pair would be better, we suggest sectional area are 0.22 square millimeter at least. The length should not exceed 100meters.

Connect Shielded wire to GND.